The reflections are a bit tricky. I want the tuba to reflect the environment, but not the windows... But I want the windows to reflect the tuba, with the environment...
I have a lot of render layers to deal with this problem...
I used a separate mesh for the fabric collision and it appears to be blocking the shadow of the words on the ground except in the places where the ground is higher than the bounce plane...
I have been working on developing an interface to bring my character into a physical environment for 5194. I was hoping I could use the result to provoke a genuine response from an unscripted audience for the final shot in my Tuba-goose project. I hoped I could build something with the lenses I have, order a custom lens (they are only $12 a foot + the price to cut), or create a parallax barrier. Unfortunately, creating a high quality lens does not seem possible with the materials I have (2 of the sample packs of 8" X 10" lenses Microlens sends with bulk orders of 50+ lenses), and a parallax barrier blocks light exponentially based on the number of viewing angles (2 views blocks 50%, 3 blocks 66%... 10 views blocks 90%).
I am going to try a patch that blends pixels to fix the problem with the lines on the screen not lining up with the lenses (it basically blends interlaces to make a non integral number of pixels with the lines per inch of the lens).
Worse case scenatio... A ready to go lenticular monitor is $500, the lens designed to work with a 23" monitor is $200, and a 23 inch monitor with a pixel pitch of .270 mm is about $130.
Links I have found useful are...
I went out to the location and compared the model with the physical location. I was having trouble getting the model to match the location because the corner of the building was not 90 degrees.
I have finished the mask and I am working on the words.
Photos will follow.
I have been spending a lot of time working on an augmented reality display that I hope to use with either a parallax barrier or a lenticular lense LCD. The project is for Experiential Media, but he wanted our work to relate to our thesis. I was hoping to this patch and display (or something like it) to provoke reactions out of people for the "Magician Style Editing" shot I still plan to use to create the climax and resolution scenes. I was testing Lenticular Lenses A pre-made screen is $500, and the lens mounted to class is $200. The lenses are $6 a sq foot without the glass, so I am going to try creating my own monitor from a 31 LPI lens (which I do not have, but my research suggests it is the best match for the pixel pitch of the available monitors). I was going to try to index match the lens to the glass with some oil instead of adhesive, so I could correct the interference distortion caused by micro misalignment during registration. If that doesn't work I could create a parallax barrier, but that would throw away 50% of the light for 2 images, 66% for 3, and 90% for 10. I hoped to use 9 images, so that would be a serious reduction in the brightness. Below are some images from the patch with some videos from the process.
Interactive Augmented Reality Display for ACAD 5194/Experiential Media
Operator Interface
(used to calibrate the virtual environment with the physical)
Video of the Working Patch
0:00 - 0:01 changing the relative angle
0:01 - 0:04 changing the relative x position
0:04 - 0:09 changing the XYZ rotation
0:09 - 0:20 adjusting the width and distance between the interlaced lines
0:20 - 0:30 adjusting the scale and XYZ YPR of backdrop 1
0:30 - 0:50 adjusting the scale and XYZ YPR of backdrop 2
0:50 - 0:60 adjusting the scale and XYZ YPR of the model
First Tests of the Lenticular Lens
(the resolution is bad because the only lens I had that would match the pixel pitch of the available monitors was 10 LPI)
I am a Kinect to get the Audience Information for Interactivity
The resolution is terrible because the only I have gotten to work is broadcasting an 80X60 image. But, the depth information is there, so I have managed to get it to work with a great deal of processing.
The Processing Process
I created an actor that changes the luminescence to color, and used another actor to create an outline around the colors so the Eyes++ actor could identify different object, even if they are touching, as long as they are at different depths.
I shot some footage for the store scene. I wanted it to be on a corner because 2 of my 3 shots are flat, which is OK in a book, but a pretty boring animation.
I am building a 3D environment and matching it to the scene now.